Replaced Knock Sensor and Still Getting Code P0332

The manufacturer keeps on filling modern vehicles with sensors. Using these sensors will help to detect problems at the right time so that solutions to specific issues can be searched best. Usually, there is a specific code given to the vehicle’s issues. 

Usually, code P0332 will be displayed on the screen when the knick sensor notices low voltage. The main reason for such a code in the machine is that the sensor is offline for the time being. 

How to Fix Knock Sensor Low Voltage?

It does not mean that the defect is there with the knock sensor, but it just depicts that the ECM is not taking up the proper reading at the current time.

Table of Contents

Do You Need to Reset ECU After Replacing Knock Sensor?

Have you made a final decision to replace the knock sensor? If yes, then resetting of ECU is required for sure. After completing the task, you will have full power immediately after the act. Some common symptoms will indicate that your vehicle is facing the error of code P0332. 

There is a high chance that you will hear a high sound of the engine pinging, or the situation might lead to heating in the engine. 

If you notice any of the below-mentioned symptoms, then high chance are there that you need to consult with professionals: 

  • Check the light of the engine
  • An increased amount of emissions or failure in the emission test
  • Engine pinging
  • The engine is running hot at the time

What Can Cause a False Knock Sensor Code?

Code P0325 is a possible indication that will affect the engine working of the knock sensor. One of the main reasons that lead to the problem of the false knock sensor is the problem with the engine’s working. 

It is not just reason that will lead to such a problem. There are even some other issues that can lead to such issues:

  • Issue with PCM
  • Internal problem with the engine
  • An issue with the working of a circuit
  • Faulty knock sensor

If you notice a problem with the vehicle, consulting a professional at the right time is advisable. Some common symptoms will indicate that the vehicle is facing an issue with a code like P0325.

Check the light of the engine; lack of acceleration and excessive fuel consumption will act as a symptom of facing problems like P0325. If the symptoms are clear, then diagnosing the issue at the right time becomes easy.

What Can Cause a P0332 Code?

There is a high chance that the vehicle will show code P0332 due to the defect in the knock sensor. It is the main reason that will lead to such a problem in the car. Another major cause of the problem is poor electrical connections that might create future problems with code P0332.

Some other causes will also lead to the false knock sensor code. If the problem is with the circuit electricity, it will cause even more severe issues.

  • Defective knock sensor
  • Poor connection
  • Electrical problems
  • Defective EGR system
  • Cooling system malfunction
  • Lean air-to-fuel ratio

Can Bad Gas Cause Knock Sensor Code

How Do You Fix the Knock Sensor Code P0332?

In case of the error of code P0332, people can only replace the knock sensor at the right time. The problem could be an underlying electrical condition. 

The problem in the vehicle might be due to various issues, including the defective EGR and the cooling system.

Are you facing troubleshooting problems in vehicles? In that case, the first thing you have o do is to determine the reason for the fault so that you can find the required solutions. You can use the OBD-II scan tool to have a clear look at the readings in the best way.

You can replace the sensor at your level or hire a professional. Doing a task at your level will cost between $25 and $75, based on the vehicle you drive. Hiring a professional for a task will cost between $300 t $400 as they are professionals who have a proper idea of the task.

What Is The Exact Location Engine Knock Sensor Located?

The check engine light might be illuminated because of the faulty knock sensor. The knock sensor is mainly located on the left side of the engine block. It is a place that is just below the intake manifold.

What Is The Exact Location Engine Knock Sensor Located

The leading cause of the sensor’s failure is the problem with working the problem in electrical connection. If you face a faulty sensor, it’s high time you get sensor changes at the right time. The car’s efficiency will be in case of the change in sensor.

Is it OK to drive a vehicle without a sensor?

A person can drive the car even if it does not have the knock sensor, but the only effect of the absence of the sensor will be that the overall performance of the car will be affected. The engine of the vehicle will no more remain in good condition without the presence of the sensor.

The best option for the car is to use a high-quality sensor in the vehicle. If the problem is there with a car’s sensor, then you can opt for replacing the sensor of a vehicle at the right time.

Is code P0332 Serious?

Various codes are related to multiple problems of the vehicles. But if we talk about P0332, there are more serious options. The main reason that code P0332 is displayed on the screen is due to the offline mode of the knock sensor. It will not display the accurate rating on the screen.

In the case of the P0332 as the vehicle’s code, there are high chances of engine emissions. It will indicate that passing a specific engine task will become problematic. Though the problem is not that serious, finding a solution to issues at the right time will be the best option for you.

What happens when a knock sensor fails?

The engine warning light turns “ON” your vehicle. Error code is stored and reduces engine power. It increases fuel consumption, and you identify this quickly without technician help.

Leave a Comment